Belt Type Dryer

Belt Type Dryer principle:




1.The materials are uniformaly put on the mesh-belt by the material charger.
2.The mesh-belt uses generally 12-60 mesh stainless steel wire net and it is drawn and moved inside the drier by a transmission device.
3.The drier is composed of several units. For each unit, the hot air is circulated separately. Some exhausted gas is discharged with a special moisture elimination blower.
4.The waste gas is controlled through an asjustment valve.
5.The hot air passes through the mesh-belt covered with the material from the top to the bottom or from the bottom to the top and this will complete the heat and mass transfer process. This process will bring the material water away.
6.The mesh-belt moves slowly, running speed can be frely adjusted according to the material temerature. The final products after the drying will fall into the material collector continuously.
7.The top and low circulation units can be freely equipped accordign to the user’s demand.
8.The uinit number can be selected according to the demand.







Belt Type Dryer application:

De-watering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, acryl fibre, medicine product, medicine material, small wooden products, plastic product, aging and solidification for the electronic component and device etc.


Belt Type Dryer photos:

 info@astarmachine.com
 what's app: 0086-13721419972
             0086-15178920906